1837 Liberty Seated Dime Error List with Pictures

An 1837 Large Date dime with a repunched 7 sold for $10,370 in June 2026, graded CACG MS65. Its seated figure has no surrounding stars by design.

This 1837 Liberty Seated dime error list covers rotation, clashes, cracks, and repeated date detail. Estimated whole-coin values span $100–$12,500.

Read on to compare the correct Large Date or Small Date example, and keep this design separate from the 1837 Capped Bust dime.

1. 1837 Liberty Seated Dime Rotated Dies (Estimated Up to $2,500)

The back can lean left after the upright seated figure is flipped over. This happens when the two stamping tools do not face each other at the usual angle.

About 23 degrees of left rotation is recorded for the Large Date F-101 group and a Small Date F-103a example. The F numbers identify different varieties.

Other Small Date varieties have normal alignment. The year alone does not prove rotation.

Two photographs that have each been turned upright hide the relationship. The coin must be checked while keeping the same turning direction.

Estimated Value

Estimate $100–$2,500 for worn through lightly worn examples with the recorded rotation. A modest tilt adds interest, but the underlying dime’s condition remains important.

The F-101b graded CACG MS65 sold for $10,370 in June 2026. That exceptionally preserved, unworn coin also has the repunched date.

Its price belongs to a higher condition group than circulated examples. It does not establish a $10,370 premium for 23 degrees of rotation on any ordinary coin.

How to Identify

Hold the seated figure upright and flip the dime top to bottom without twisting it sideways. Under normal alignment, the back should then appear upright too.

Repeat the flip and compare the back with a vertical line. Use a protractor or aligned photographs to measure the tilt, keeping the same viewing direction as the reference.

With a magnifier, check the date style and inspect the edge grooves for seams or damage. Calipers and a scale should give about 17.90 mm and 2.67 grams, allowing for wear.

Do not straighten each photo separately. The quickest test is to repeat the same flip and see whether the back keeps its leftward tilt.

 

2. 1837 Liberty Seated Dime Die Clash (Estimated Up to $5,000)

Faint extra shapes can appear around Liberty’s upper body and behind her on the Large Date F-101c. A separate Small Date example has a bandlike mark below the back-side bow.

These are reported clash marks. They form when the two stamping tools collide without a metal disc between them.

The collision damages the tools, which can then transfer traces of the opposite picture onto later coins. A random scratch does not follow that other design.

The Large Date and Small Date locations belong to separate examples, so each needs its own comparison.

Estimated Value

The estimated whole-coin range is $100–$5,000 for worn through well-preserved unworn examples with clear clash marks. Strong extra detail and original surfaces can attract collector interest.

The $10,370 F-101b MS65 sale gives context for a much higher-grade coin. It does not separately price the F-101c clash described here.

Compare the same date style and similar condition. More visible lines alone do not guarantee a higher price, especially if cleaning or scratches affect the surrounding surface.

How to Identify

Use a scale and calipers first to check about 2.67 grams and 17.90 mm. Inspect the edge grooves and confirm the seated design, rather than the larger Capped Bust type.

Then select the right date style. For the Large Date example, use a magnifier around Liberty’s upper body and behind her.

For the separate Small Date example, examine the back below the bow. Move the light to distinguish shallow extra shapes from scratches cut into the surface.

A thick or dark band does not tell you how many collisions occurred. Start by matching an extra contour in the correct area to the opposing design on a confirmed example.

 

3. 1837 Liberty Seated Dime Die Cracks (Estimated Up to $5,000)

Raised lines spread inward across the front of the Large Date F-101c. They begin around four and seven o’clock and approach the area behind Liberty’s knee, with another line near one-thirty.

The Small Date F-103a has a different crack on the back. It starts at the left rim and crosses lettering, the wreath, and ONE DIME.

A crack in the steel stamping tool leaves a raised ridge when silver fills it during striking. It does not need to split the coin itself.

The two routes belong to separate tools and separate examples.

Estimated Value

Estimate $100–$5,000 for worn through well-preserved unworn examples with these cracks. The clarity of the lines matters alongside the whole coin’s condition and original surfaces.

GreatCollections records an F-101c with the fan-shaped front cracks and rotated back at about $619. That is a useful whole-coin comparison.

It is not a charge for each branch of the crack. An exceptionally preserved coin may need a different comparison, even when its lines follow the same routes.

How to Identify

For the Small Date example, follow the back-side line from the left rim through E in UNITED. Continue across the wreath and O in ONE toward ME in DIME.

The F-103a photograph shows that route. For the Large Date, compare the lines converging on the front instead.

Use a magnifier and low-angle light to check that the lines stand above the silver. A scratch cuts down into it.

Check 17.90 mm with calipers, about 2.67 grams on a scale, and the edge grooves for damage. For a quick match, choose the date style first, then trace its specific front or back crack route.

 

4. 1837 Liberty Seated Dime Repunched 7 (Estimated Up to $12,500)

The final 7 has a flat top and a small extra trace at the left side of its base. The flat top is normal for the Large Date style; the extra base detail shows repunching.

The date punch entered the steel stamping tool more than once. Part of the earlier numeral survived beside the finished 7.

The feature is illustrated on F-101a, with later examples belonging to the same tool family. Wear and later work on the tool can weaken the tiny trace.

A flat-topped 7 alone does not prove that the repeated detail survives.

Estimated Value

A June 2026 Stack’s Bowers sale brought $10,370 for an F-101b graded CACG MS65. The grade describes an exceptionally well-preserved, unworn coin with the repunched-date variety identified.

Estimate $100–$12,500 across worn through exceptional Large Date examples. This is a range for complete coins.

The tiny repeated stroke helps identify the variety, but it does not automatically make a worn or cleaned dime worth five figures. Original surfaces and condition remain essential to the comparison.

How to Identify

Focus a magnifier on the left side of the 7’s base. Compare the small raised trace with a confirmed Large Date example, keeping the entire digit in view.

A broad flat shelf or a cut beside the number is different from the rounded remains of an earlier punch. The normal flat top identifies the date style, not the error by itself.

Confirm the seated figure without stars and inspect the edge grooves. Use a scale and calipers against about 2.67 grams and 17.90 mm, allowing for wear.

Nearby cracks or clash marks do not replace the date evidence. For a quick check, match the extra raised stroke at the lower-left base of the 7.

 

Conclusion

Estimated whole-coin values for these 1837 Liberty Seated dimes range from $100 to $12,500. The missing stars are normal design; the errors need separate checks at the date, around the picture, or through a careful flip.

Choose the correct date style and preserve the surfaces. The $10,370 repunched-date sale shows how much exceptional condition can matter, rather than setting that price for every dime with one small extra mark.