1964 Penny Error List with Pictures

A copper-colored penny with a tiny lump and a pale penny on the wrong blank need very different checks. The latter can be much more valuable: a clad-dime-blank example brought $5,280 in May 2022.

These 1964 penny errors cover missing metal, extra strikes, doubled letters, and even an older Indian coin beneath Lincoln. Estimated values span $2–$20,000.

Use the visible feature to choose a section, then compare its measurements and price examples. Several striking problems can appear on the same penny.

1. 1964 Lincoln Penny Die Chip (Estimated Up to $50)

A small lump beside the normal design can begin as a hole in the die, the steel tool that stamps coins. Metal fills that hole during the strike.

The result stands above the penny’s surface. Collectors call it a die chip.

Chips are reported for 1964 without one fixed position or mint assigned to every example. The actual raised patch needs to be examined on the coin in hand.

These pennies use copper alloy throughout. A bump should not be explained as a blister in the thin copper coating used on much later cents.

Estimated Value

For a small original chip, estimate $2–$50. A clear shape that joins recognizable lettering or portrait detail is usually more interesting than a tiny isolated bump.

This modest estimate compares small Memorial-cent tool chips. It is not a recorded sale for an identified 1964 working tool.

Large rim-connected breaks belong to a different price comparison. A seller should not use the price of a dramatic missing tool section to justify a similar amount for a pin-sized lump.

How to Identify

Tilt the penny under a lamp and watch whether the feature rises above the surrounding surface. A hole cut into the coin is not a raised chip.

The normal 3.11-gram weight and 19.05-mm width can be checked with a scale and calipers when the coin is safely accessible. Follow the smooth edge for squeezing or added material.

Use a 10× magnifier to examine how the lump joins the original design. Glue, corrosion, and pushed metal may have different surfaces or disturb nearby details.

No single location identifies every 1964 chip. An original raised patch that fits a missing piece of the stamping tool is the feature to compare.

 

2. 1964 Lincoln Penny Repunched D (Estimated Up to $200)

The D below the date may have an extra curve or straight stroke. That small second outline can survive from an earlier placement of the letter punch.

Workers punched mint letters into individual stamping tools in this period. Moving the punch between blows could leave two overlapping positions.

The finished tool then repeated that shape on many pennies. The penny itself did not have to receive a second strike.

A tilted D alone does not prove a repunch. Look for recognizable remains of another letter instead of treating any irregular mintmark as valuable.

Estimated Value

An identified 1964-D repunch can fit an estimated $5–$200. Strong separated strokes and an attractive unworn surface support the higher part of this range.

The estimate reflects similar minor Memorial-cent mintmark varieties, rather than a confirmed auction result for every reported pattern. Different overlaps should be compared with their own photographs.

A small tool chip can thicken the D without creating another placement. Confirming that difference matters more than whether a seller describes the letter as unusually large or slanted.

How to Identify

Focus a clear close-up on the small D below the date. With a 10× magnifier, try to trace a second letter through its top, lower curve, or opening.

The copper-alloy penny should measure about 19.05 mm and weigh 3.11 grams. Check with calipers and a scale when safely accessible, then inspect the smooth edge for pressure or added metal.

A flat shelf beside the D can come from movement during striking, while corrosion may leave an irregular bump. Neither proves that the letter punch was placed twice: a recognizable second D stroke matching a photographed variety is the useful evidence.

 

3. 1964 Lincoln Penny Doubled Front or Back Design (Estimated Up to $400)

ONE CENT or the smaller front lettering can show two edges where only one belongs. The doubled shape began in the stamping tool before the penny was struck.

Front varieties are reported for both no-mintmark and Denver cents. Their features involve the motto, LIBERTY, or date, depending on the particular tool.

No-mintmark back varieties include doubled lettering and details near the small FG initials. Those initials identify designer Frank Gasparro.

The back variety called FS-802 is documented for Philadelphia. Its name and photograph should not automatically be carried over to a Denver coin.

Estimated Value

A Philadelphia doubled-back example graded MS66 Red sold for $165 in October 2013. The grade describes a well-preserved unworn coin with its original red copper color.

For identified front and back varieties, estimate $5–$400. Strength, exact pattern, and preservation matter more than the general word doubled.

The historical sale is a back-variety comparison, not a price for every front listing. Small flat shelves caused during striking should not receive the same premium without a matching doubled-tool design.

How to Identify

Choose the front or back before comparing photographs; the expected locations differ. On the back, inspect ONE CENT, STATES OF, and the FG area as appropriate to the named variety.

Use light from several directions so that a shadow does not create a false second edge. Rounded separated strokes are more useful than flat shelves beside damaged letters.

Weigh an accessible coin against 3.11 grams and measure its 19.05-mm width with calipers. Examine the smooth edge for pressure that could have altered nearby letters.

A Denver D requires a Denver comparison, even if a Philadelphia photograph looks similar. The strongest check is the same repeated shape in the same design location.

 

4. 1964 Lincoln Penny Defective Blank, Sometimes Broadstruck (Estimated Up to $500)

An uneven blank can reach the press with rough edges or missing metal already present. The design then forms around those flaws.

One 1964 no-mintmark example has a recorded weight of 2.7 grams. Its general defective-blank description does not establish that a layer peeled away.

Another coin has a rough upper-left edge and an unusually wide border toward the lower right. It also spread outward during striking, an effect called a broadstrike.

The original description suggested an irregular corner of metal strip as its source. That possible origin is not needed to recognize the visible defect.

Estimated Value

Estimate $20–$250 for an original defective blank and approximately $50–$500 for a clearer defect-and-broadstrike combination. Each figure concerns the whole coin.

A 1980-D broadstrike sold for $57 in March 2021. Its copper-rich blank makes it a related expansion comparison, although it does not prove the origin of the 1964 rough edge.

Natural struck surfaces are essential. Corrosion or a later cut can create missing metal without carrying the same mint-error premium.

How to Identify

The two examples need different starting checks. The first has a reported 2.7-gram weight, which a precise scale can compare with the normal 3.11 grams.

For the other, inspect the rough upper-left boundary before the wider lower-right border. Calipers record its uneven spread against the ordinary 19.05-mm diameter.

Look along the normally smooth edge with a 10× magnifier. Filing and corrosion can create roughness after the coin already has its design.

A rough patch alone does not establish a split metal layer. Follow the nearby letters without cleaning the surface.

Original design flowing toward the defective boundary helps show that the flaw was present during striking.

 

5. 1964 Lincoln Penny Off-Center Strike (Estimated Up to $600)

Part of the penny remains blank while Lincoln and the Memorial sit too close to one edge. The disc was out of position when the tools came together.

No-mintmark and Denver examples are reported for 1964. One no-mintmark specimen is described as forty percent off center.

That specimen also has later front damage. The damage does not explain the original displaced strike, but it affects the coin’s condition.

A small shift can leave most letters readable, while a larger one may remove the date from view. The same percentage or direction should not be assumed for every example.

Estimated Value

Dated 1964 off-center pennies can fit an estimated $20–$600. A readable date and natural surfaces make it easier to compare the coin with others.

A sixty-percent off-center 1972-D copper-rich cent sold for $44 in September 2025. That recent result shows why a large percentage alone does not guarantee a high price.

The recorded forty-percent 1964 coin needs an adjustment for its later damage. Compare the complete object, including preserved details, rather than pricing only the size of its blank crescent.

How to Identify

A cent that has been ground down may be too light, so compare an accessible coin with the normal 3.11 grams first. Calipers record its outline against the usual 19.05-mm diameter.

Now inspect both faces for the line between struck and untouched metal. The displaced designs should fit one blank sitting partly outside the striking area.

If only one face is poorly centered, a shifted stamping tool may explain it. Do not use that one-sided effect to estimate a large off-center percentage.

Follow the smooth edge and blank crescent for filing. A readable date beside original untouched metal on both faces gives the most useful initial comparison.

 

6. 1964 Lincoln Penny Struck Through a Late Die Cap (Estimated Up to $750)

One side can lose much of its sharpness without ordinary circulation wearing down the whole penny. A coin stuck to a stamping tool formed a covering called a die cap.

Later pennies were struck through that covering. As it thinned, some of the tool’s design could press through in a softened form.

The recorded 1964-D example is a late-cap receiving coin, graded ANACS MS63 Brown. The grade means unworn with visible marks and brown copper surfaces.

It is not the cup-shaped covering itself. Its affected face must be identified from the actual coin rather than guessed from the name.

Estimated Value

Use an estimated $50–$750 for identified 1964-D late-cap strikes. The shape and strength of the softened design help determine the closest comparison.

A 1995 late-cap receiving coin sold for $180 in March 2025. That later zinc-centered cent provides a comparison for the covered-strike effect, not the metal composition.

The 1964-D piece appeared in a mixed lot. Its individual price should not be invented by dividing the total, and a plain weak strike should not automatically receive a cap-strike premium.

How to Identify

Place photographs of both faces side by side. Identify which design is softened, then check whether the opposite face remains more clearly formed.

Under a 10× magnifier, look for a connected pattern of covered detail. Random worn spots or a surface ground flat may point to later changes.

The normal blank is 3.11 grams, 19.05 mm wide, and smooth-edged. A scale and calipers help assess an accessible coin without identifying the covered face by themselves.

Do not expect a deep cup on this receiving penny. The useful evidence is a softened design that matches a late covering, paired with stronger original detail on the other face.

 

7. 1964 Lincoln Penny Struck on a Split Blank (Estimated Up to $800)

The coin can be unusually thin because its blank separated into layers before striking. Only one part of the original metal disc reached the press.

The exposed separation surface may look rough, and the design can be shallow. A reported 1964 example weighs 1.54 grams.

A different split-blank penny weighs 1.35 grams and was also struck about five percent off center. Its low weight and shifted design belong to the same coin.

These pennies use copper alloy throughout. The thin piece is not a copper coating stripped from a zinc center, as on later cents.

Estimated Value

A 1964 split-blank cent graded PCGS 60 brown sold for $53 in May 2021. It was unworn, with substantial marks or surface limitations.

Estimate $40–$500 for a clearly identified split blank, and $100–$800 for a split blank combined with an off-center strike. The $53 result is not assigned to the separate 1.35-gram shifted example.

Original separated texture and readable design matter more than low weight alone. Later grinding does not create the same mint error.

How to Identify

Put an accessible coin on a precise scale before deciding that it uses foreign metal. The 1.54- and 1.35-gram reports are far below the normal 3.11 grams, but belong to separate specimens.

Use calipers to record thickness and compare the outline with a normal 19.05-mm cent. Inspect the edge, which normally is smooth, for a thin original cross-section rather than filing.

The rough separated face should also carry evidence of the later strike. A piece that separated after striking can show a different relationship between design and fracture.

For the shifted example, identify the untouched crescent separately. Thin original metal with struck detail across its separation face is the main check.

 

8. 1964 Lincoln Penny Struck Through a Metal Flake or Wire (Estimated Up to $1,000)

An object between the blank and the stamping tool can interrupt the design. The penny records its shape instead of receiving all the intended detail.

One 1964 example was struck through a detached metal flake. This describes the intervening piece; it does not mean that the flake remains attached today.

A separate collector report describes a wire remaining in a 1964 cent. Its exact position should be checked on that specimen.

The two cases differ in what survives. An empty impression and an embedded object can reveal the same general obstruction during striking without looking alike.

Estimated Value

A clear impression from a loose flake can fit an estimated $25–$300. An authenticated retained wire can be compared within approximately $100–$1,000.

The wire range applies to metal caught during original striking, not a later attachment. The available report does not establish an auction price for that object.

Visible shape and convincing original surfaces influence both ranges. Keeping an embedded piece in place preserves evidence that would be lost if someone pulled it out to test the description.

How to Identify

Leave any embedded material untouched. Removing it may destroy the most useful clue about how the design formed around it.

With a 10× magnifier, follow the border of the impression or the surviving wire. The surrounding design should fit pressure during striking, rather than a cut made afterward.

A normal penny weighs 3.11 grams and measures 19.05 mm. A scale and calipers can record changes when the coin is safely accessible; retained material may affect its total weight.

Inspect the smooth edge and both faces for glue, solder, or forced insertion. Original struck metal meeting the object’s boundary is stronger evidence than the mere presence of a wire.

 

9. 1964 Lincoln Penny Broadstrike with a Blank Indent (Estimated Up to $1,000)

The penny can spread wider than usual and still carry a separate dent from another blank. The expanded shape forms when the edge is not properly restrained during striking.

A nearby blank can overlap part of the coin at the same time. Its smooth surface leaves an area without the intended design.

Reported 1964 examples have overlap marks described as seven and eighteen percent. Those percentages belong to separate coins.

The indentation should not be called a brockage unless it contains a sunken mirror image transferred from a struck coin. A plain blank leaves no such earlier design.

Estimated Value

A 1964 broadstrike with a seven-percent indent sold for $54 in March 2025. PCGS graded it 63 brown, meaning unworn with noticeable marks.

Use an estimated $40–$1,000 across clear original broadstrike-and-indent combinations. The amount of overlap, expanded shape, remaining design, and condition help explain the wide comparison range.

That sale concerns one combined coin. The separate eighteen-percent example needs its own assessment, and a later impact dent does not create the same mint-made combination.

How to Identify

Calipers can establish whether the coin spread beyond the normal 19.05 mm, while a scale checks for retained weight near 3.11 grams. Measure only when it is safely accessible, and inspect the normally smooth edge for hammering or squeezing.

Within that larger outline, find the separate overlap depression and look closely for backward lettering. A smooth empty area fits another blank; a sunken mirror image suggests contact with a previously struck coin instead.

The intended outer letters should remain within the expanded metal on both faces. Trace how the struck design ends at the depression: the enlarged outline and original blank-shaped interruption need to make sense together.

 

10. 1964 Lincoln Penny Double Strike, Including a Flipover (Estimated Up to $1,500)

An extra strike can leave anything from a small rim impression to another complete design position. The coin failed to leave the press normally after its first blow.

One 1964 cent first spread outward, then received a second strike ninety-nine percent off center. Only a tiny part of that later design reached the coin.

A different example has two off-center strikes. Another turned over before its second blow, placing front and back designs over each other.

The last event is a flipover double strike. Its mixed designs differ from small doubled letters already present in a stamping tool.

Estimated Value

The broadstruck coin with a ninety-nine-percent off-center second blow sold for $219.60 in March 2026. It was graded PCGS MS61 Red, meaning unworn with substantial marks.

Across the different double-strike sequences, estimate $100–$1,500. A recognizable flipover or two clear design positions can create a more dramatic display than a tiny second mark.

The recorded amount belongs to one combined coin. It should not be added to a separate broadstrike price or assigned automatically to the flipover example.

How to Identify

Choose one feature from each strike and trace both positions. A date fragment or repeated portrait outline can help separate them under a 10× magnifier.

On a flipover, look for parts of the Memorial sharing a face with Lincoln. Ordinary narrow shelves beside letters cannot explain two opposite designs occupying that surface.

A scale checks the original 3.11-gram blank, while calipers record any spread beyond its normal 19.05 mm. Measure only when the coin is safely accessible.

Inspect the smooth edge for later crushing. Two connected, original design impressions establish the extra strike more clearly than an irregular outline alone.

 

11. 1964 Lincoln Penny Clipped Blank and Related Combinations (Estimated Up to $1,500)

Two large gaps can leave a narrow middle that resembles a bowtie. The 1964-D example weighs only 0.53 grams, yet keeps its date and mint letter.

Other incomplete blanks have overlapping curved gaps, a crescent shape, a straight missing side, or rough missing edges. All lacked part of the metal before striking.

Some also received an off-center design. That untouched space still contains metal, unlike the actual missing gap.

A straight-clipped combination is assigned to 1964-D without a fully readable date. Separate specimens retain their own shapes, weights, and levels of later wear or damage.

Estimated Value

The 0.53-gram Denver bowtie sold for $660 in April 2020. Its preserved date and D help explain the unusual tiny shape.

Ordinary clips can fit an estimated $10–$200; dramatic shapes and combined shifted strikes can fit approximately $100–$1,500. These are whole-coin comparisons.

A corroded ragged-clip example needs its own condition adjustment. Neither the number of gaps nor the weight alone sets the value, and several errors on one penny should not receive separately added full prices.

How to Identify

A scale reveals very different amounts of surviving metal: the bowtie is 0.53 grams, the crescent one gram, and one overlapping double clip 1.5 grams. Compare these with the normal 3.11 grams without assuming that every light penny has the same shape.

Use calipers across an intact span against 19.05 mm. Trace both gap boundaries and the remaining smooth edge for cutting or filing marks.

Denver double-curved and straight-clipped examples each have reported two-gram weights, despite different outlines. Photograph the actual boundary instead of calculating a shape from weight alone.

Where a shifted strike is also present, separate missing metal from unstruck metal. Original design meeting a preexisting gap is the essential distinction.

 

12. 1964 Lincoln Penny Triple Saddle Strike (Estimated Up to $2,500)

The penny does not lie like a normal flat disc. Several strike areas leave raised metal between them, creating the saddle-like shape named in the error.

The recorded 1964 no-mintmark example is a triple saddle strike graded PCGS MS65 Red and Brown. It is unworn, with a mixture of original red and brown copper color.

Three impressions belong to the same object. Their positions and the raised middle need to be viewed together.

A side view is especially useful. Bending a finished penny can imitate a curve, but cannot create the original overlapping struck designs.

Estimated Value

The documented PCGS MS65 Red and Brown example sold for $960 in July 2021. Another 1964 triple saddle strike graded MS64 brought $1,440 in January 2020.

Use an estimated $700–$2,500 for comparable confirmed pieces. Those two results show why a single grade point does not determine the entire price.

Visible design, the depth of the shape, and damage to projecting metal also matter. The three impressions form one error coin rather than three separately priced cents.

How to Identify

A side photograph is more useful than pushing this coin flat. The raised middle and the strike areas should remain undisturbed.

Support an exposed coin carefully while examining the connecting metal. Under magnification, locate the three design impressions without assigning their exact order from the shape alone.

Its original blank normally weighed 3.11 grams and measured 19.05 mm. A scale and existing caliper measurements can document the altered object without stressing it.

Follow the normally smooth edge for plier marks or repairs. Sharp forced bends can expose a later alteration.

Original strike areas joined through the raised metal distinguish the saddle shape from a bent ordinary penny.

 

13. 1964 Lincoln Penny Silver Dime Blank (Estimated Up to $3,000)

A pale penny with cut-off outer letters may have started as a silver dime blank. The wrong disc entered equipment intended to strike cents.

Both no-mintmark and Denver examples are documented for 1964. They include worn and unworn specimens, so their appearance and condition vary.

The silver dime blank normally weighed 2.50 grams, rather than the cent’s 3.11 grams. Its smaller size also limited the room for the design.

No earlier Roosevelt picture is expected on an unused blank. An older dime design underneath Lincoln would indicate an overstrike on a finished coin instead.

Estimated Value

A no-mintmark example graded PCGS MS64 sold for $1,260 in May 2022. That grade describes an unworn coin with some marks.

Estimate $500–$3,000 across identified silver-dime-blank cents in different conditions. The separately recorded MS62 no-mintmark and AU58 Denver coins should not automatically receive the MS64 sale price.

AU58 indicates slight wear. Visible date, mint identity, original surfaces, and confirmed silver metal help select the closest comparison rather than simply choosing the highest wrong-blank price.

How to Identify

An accessible coin near 2.50 grams deserves a different check from a normal 3.11-gram penny. Use a precise scale, then compare its width with the cent’s 19.05 mm using calipers.

The smaller blank can lose outer lettering without an obvious off-center design. Examine how the letters meet the edge on both faces.

Normal cents have a smooth edge; this wrong blank’s outline may be changed by the strike. Look for plating, filing, or a copper-colored core that suggests a different metal structure.

Professional metal testing can confirm silver without scraping the coin. Silver throughout the smaller disc, together with original cent designs, is the important combination.

 

14. 1964 Lincoln Penny Struck Over a Finished Dime (Estimated Up to $7,500)

A small blank error and a dime overstrike can share a pale color. The difference appears when parts of Roosevelt or the torch remain beneath the cent design.

The dime was already a finished coin before Lincoln’s design arrived. The later strike pressed new images over the old ones without erasing every trace.

The documented 1964 no-mintmark example was graded PCGS MS66. That describes a well-preserved unworn coin.

Its underlying dime’s date is not established by the brief description. The date on the cent design should not be copied onto the older coin by assumption.

Estimated Value

The PCGS MS66 overstrike sold for $5,040 in May 2022. Estimate $2,000–$7,500 for comparable identified examples with different preservation and surviving dime detail.

The earlier design gives collectors something extra to study beyond the wrong metal alone. A clearly readable host date can help, but this recorded example should not be assigned one without evidence.

That sale concerns one finished-dime overstrike. It is separate from the silver blank and clad blank sold in neighboring auction lots.

How to Identify

Inspect the edge for a joining seam before tracing the overlapping pictures. Two coin faces attached afterward can imitate an overstrike, while a normal cent begins with a smooth edge.

A scale and calipers record an accessible coin’s measurements against 3.11 grams and 19.05 mm. The underlying dime’s metal must then be identified separately rather than assumed from the cent date.

Look for a torch or Roosevelt outline between the strongest cent details with a 10× magnifier. Check the other face too.

Scratches may cross a design without following any older picture. Recognizable dime features lying beneath the cent impression give the clearer explanation of an original overstrike.

 

15. 1964 Lincoln Penny Clad Dime Blank (Estimated Up to $8,000)

A copper-colored stripe at the edge separates this wrong blank from the silver version. Clad dime metal has pale outer layers bonded around a copper core.

The 1964-dated cent struck on that blank is especially interesting because United States clad dimes carry dates beginning in 1965. The date on a stamping tool does not always identify the calendar year it was used.

The documented example was graded PCGS MS65. It carries the cent design on an unused clad dime blank.

That is different from a completed dime with Roosevelt’s design still present underneath Lincoln.

Estimated Value

The PCGS MS65 example sold for $5,280 in May 2022. Use an estimated $3,000–$8,000 for comparable confirmed clad-dime-blank examples.

The price reflects this unusual dated combination as well as its preservation. It should not be borrowed for every silver-colored 1964 cent.

A silver dime blank, a plated ordinary penny, and a clad dime blank have different identities. Establish which metal structure is present before choosing the relevant price range.

How to Identify

Inspect the edge before judging the face color. The copper core between pale outer layers is a useful clue to clad dime metal.

A clad dime blank normally starts near 2.268 grams and 17.91 mm, compared with a cent’s 3.11 grams and 19.05 mm. Check an accessible specimen with a scale and calipers, allowing for spread during the cent strike.

Do not demand the edge grooves of a finished dime on an unused blank struck in cent equipment. A normal cent itself has a smooth edge.

Search both faces for older Roosevelt or torch details as a separate overstrike check. The layered smaller blank and original 1964 cent impression should agree.

 

16. 1964 Lincoln Penny Struck Over an Earlier Cent (Estimated Up to $12,000)

The date beneath Lincoln can belong to a different year. An older finished penny returned to the press and received a 1964-D cent design over its original images.

One documented example uses a 1951-D Wheat cent. Both years and traces of the Wheat and Memorial back designs are described.

A separate year-guide report identifies a 1963 cent beneath a 1964-D strike. That reported combination needs its own matching older date.

The 1951-D coin cannot prove the 1963 identity. Likewise, ordinary flipover strikes may mix front and back designs without showing two different years.

Estimated Value

The 1951-D host example appeared in an older auction catalog with a $9,500 minimum bid. That figure was an entry threshold, not a confirmed selling price.

Estimate $3,000–$12,000 for an authenticated cross-year cent overstrike with clearly preserved older details. The reported 1963-host combination requires its own identification before using this range.

The two dates and visible design overlap drive the comparison. A same-year flipover or a later pressed imitation should not inherit the minimum bid from the documented older-host coin.

How to Identify

For the Wheat-cent example, locate the 1951 date separately from 1964 and look for surviving Wheat details beside the Memorial. These are the features that explain the older host.

The reported 1963 example needs recognizable pieces of that different date. An ambiguous curved line should not be filled in from a seller’s description.

Both starting cent types normally weigh 3.11 grams and measure 19.05 mm, with smooth edges. A scale and calipers check an accessible coin for added metal or major reshaping.

Inspect how one design covers the other under magnification. Two distinguishable years within original overlapping strikes separate this type from an ordinary same-year double strike.

 

17. 1964 Lincoln Penny Struck Over a Canceled Indian Quarter Rupee (Estimated Up to $20,000)

INDIA and an older date run through Lincoln’s portrait on this unusual penny. The underlying coin is a 1942 Indian quarter rupee made from fifty-percent silver.

Before receiving the cent design, it was canceled with a diamond-shaped pattern on both faces. The later strike did not erase all those marks.

NGC graded the resulting coin AU58, indicating slight wear. It is an overstrike on a finished foreign coin, not a cent made from an unused foreign blank.

The surviving designs reveal that sequence. They do not establish whether someone arranged the unusual strike deliberately.

Estimated Value

Use an estimated $8,000–$20,000 for the authenticated quarter-rupee overstrike. This is an estimate, not a recorded sale of the NGC AU58 coin.

A 1968-S cent over a 1967 Costa Rican ten-centimos coin brought $4,560 in March 2023. That different foreign host and grade provide only a related two-country comparison.

The Indian piece adds an older silver host and visible cancellation marks. Its value depends on those original features remaining identifiable, along with the later American design.

How to Identify

Find the stacked quarter-rupee wording and 1942 date crossing Lincoln’s portrait. NGC’s photographs show how the older letters survive within the newer design.

Then inspect both faces for the diamond-shaped cancellation pattern. It should belong beneath the cent strike rather than being freshly cut across the finished penny.

A normal cent’s 3.11 grams, 19.05 mm, and smooth edge are only starting comparisons for this foreign-host object. Use a scale and calipers when safely accessible, and have the half-silver metal assessed without scraping it.

Keep the older lettering, canceled surface, and later American design connected. That visible sequence identifies the object more clearly than silver color alone.

 

Conclusion

Start with what changed: missing metal, extra design, or an unusual blank. The estimated $2–$20,000 range spans tiny tool chips through the remarkable Indian-coin overstrike.

The $5,280 clad-blank sale shows why metal identity matters, while a $660 bowtie shows the appeal of an unusual original shape. Keep the date and mint tied to the actual specimen.

Photograph fragile edges without handling them unnecessarily, and leave embedded material in place.